热门图片
    Saleae Logic Pro8 ...
[详细内容]
热门产品
SL-USBISP-A II代
SL-USBISP-A
SL-AVRISP
SLISP
双龙单片机仿真
SL-JTAGICEmkII
SL-JTAGICE USB
ATMEGA406 智能电池应...
  当前位置:首页 >> 台湾研仪编程器 >> 
LabTool-T400
发布时间:2011/9/16 阅读:11110次
  • 性能特点 
    1 、无需低电压转换器即支持 3.3 ? 1.2V Flash 存储器芯片。 
    2 、支持 128G bit 大容量 Flash 芯片。 
    3 、超高速 : 1.6 秒即可对 64M bit Flash 芯片进行查空, 11.5 秒内可编程 STM28W640CT 芯片 (4 word algorithm) , 3.2 秒内可完成校验。 
    4 、支持 8 bit/16 bit 和 32 bit Flash 芯片。 
    5 、 USB 1.1 和 2.0 接口 : 一台 PC 可以连 16 台 Labtool-T400 进行异步编程 
    6 、编程前芯片插入 / 检查。 
    7 、目标数量和最大故障率警告 
    8 、支持 : Win 95/98, Win 2000, Win XP 和 Win NT 。

  • 简介: 

    LabTool-T400 Turbo Gang Programmer 有 4 个独立插座。 LabTool-T400 可以快速地编程大容量 Flash 存储器芯片。无需低电压转换器 LabTool-T400 即支持 3.3V, 2.7V, 1.8V 和 1.2V ( VCC, I/O )的芯片,并通过插座模块支持不同封装的 8/16/32 bit Flash 芯片,最大支持 128G bit 的 Flash 芯片。 LabTool-T400 是 GSM 、 3G Mobile 、 PDA 、路由器等量产厂家理想的编程器。

    无可比拟的编程速度 

    LabTool-
    T400 板载的 Compact Flash Card (CF) 减少了 PC 和编程器之间的大量数据传输,从而极大的提高了编程的速度。现在和未来没有其他 gang programmer 可以超过 LabTool-T400 的速度。 
    LabTool-
    T400 性能 ( PC:P4 1.3G 128M RAM) 

  • 直接支持1.2-3.3V NAND/NOR FLASH芯片;支持最大flash容量到128G BIT,超高速度:编程STM28W640CT只需11.5秒;USB1.1/2.0接口,一台PC机最多可拖16台LT400异步编程,可为客户定制特殊烧录软件。

  •  

    LabTool-T400 Turbo Flash Gang Programmer
    LABTOOL-T400 Turbo Flash Gang Programmer
    LabTool-T400 Option 100
    LABTOOL-T400 Option 100
    • The LabTool-T400 Option 100 is a shirk version of LabTool-T400 with affordable price.
    • The Option 100 remove three set of pin driver on T400 only one set pin driver left on T400 , The LabTool-T400 Option 100 is idea solution to customer in R/D who need to program very high density Flash chip with low voltage such as 3.3V , 1.8V and 1.2V. those high density and low voltage do not support by Labtool-48UXP.
    • LabTool-T400 option 100 can be upgrade to full function LabTool-T400 later on by purchase extra three set of pin driver and filed install by customer.
     
    Features
    • Support 3.3V to 1.2V flash memory chip in VCC and I/O without low voltage converter.
    • Flash chip support up to 128G bit.
    • Extremely high speed: it blank check a 64M bit flash chip in 1.6 seconds, program the STM28W640CT (4 word programming algorithm) within 11.5 seconds, verify within 3.2 seconds.
    • USB interface: support USB 1.1 or 2.0
    • One PC can connect up to 16 unit Labtool-T400 to perform Asynchronous programming
    • Device insertion /continuity check before programming.
    • Target quantity and Max failure rate alarm.
    • Supports Windows 98SE/Me, Windows 2000 and windows XP
     
    Introduction
    • LabTool-T400 Turbo Flash Gang Programmer is four sockets PC-based Gang Programmer. It features four independent isolated modules, extremely high speed in writing flash memory chip. It supports 3.3V, 2.7V, 1.8V and 1.2V chip in both VCC and I/O without low voltage converter and handles 8/16/32 bit flash chip in different package through adapter modules, up to 128Gb flash can be support. The LabTool-T400 is an ideal programmer for customers in GSM, 3G Mobile, PDA, Internet router and others.
     
    Unbeatable programming speed and throughput
    • The LabTool-T400 has build in Compact Flash Card (CF) on board that reduce the massive data transfer between the PC and LabTool-T400 .The LabTool-T400 performance reach the speed limitation of the chips in its spec. No other gang programmer today and future can beat the speed of the LabTool-T400.
     
    LabTool-T400 performance ( PC with P4 1.3G 128M RAM)
       
    STM 4 word algorithm
    Intel EFP algorithm
    Spansion word algorithm
        Blank check
    1.65s per 64Mb
    1.65s per 64Mb
    1.65s per 64Mb
        Programming
    11.5 sec per 64Mb
    16.6s per 64Mb
    29.5s per 64Mb
        Verify
    3.2s per 64Mb
    3.2s per 64Mb
    3.2s per 64Mb
        Total
    M28W640E in 16.3 sec
    GE28F640W30B in 21.4 sec
    Am29DL640G in 34.5 sec
     
    3.3V to 1.2V chip in VCC and I/O support
    • The LabTool-T400 use the 90nm FPGA chip in hardware design, it can handle the chip from 3.3V to 1.2V in both VCC and I/O without need special low voltage converter circuit. This new technology fulfils customer's need and makes customer's investment fully protected.
     
    High density chip support
    • The LabTool-T400 has reserved the growth potential in chip's density. It covers 8/16 bit flash today and future's 32 bit flash chip. Its I/O pin driver can cover flash with Max 128G bit in density. This growth potential protected customer's investment without purchasing a new generation programmer over a decade in future.
     
    Expansion through USB Hub and configure as a Multi-station Asynchronous Gang Programmer
    • The LabTool-T400 interface with PC through USB interface, which support USB 1.1 and 2.0. If customer needs more units in production, just purchase extra LabTool-T400 and connect those LabTool-T400 through USB Hub, up to 256 LabTool-T400 can be attached to one PC. Recommend with 8-16 unit LabTool-T400 control by one PC to avoid performance decrease. Such configuration has significantly reduces the cost per station with low initial purchase cost and growth potential in future.
     
    Adapter modules with ID
    • The LabTool-T400 adapter module has independent ID. After inserting the module in the LabTool-T400, the system will detect the module's ID and compare the corresponding adapter modules with the chip select in software. This future prevents the wrong adapter module insert or wrong chip selection in operation.
     
    Specification
     
    Device support
    • Flash memory: include NOR , NAND, EEPROM and other flash technology
    • Device data width: 8, 16 and 32 bit
    • Max flash density support: 512Mb with 128M byte Compact Flash Card install on board (standard offer), can be extend to 128Gb with exchange higher density Compact Flash Card on system hardware.
     
    File format
    • Binary, Intel Hex, Intel Ext Hex, Motorola S, HP64000 ABS, Straight Hex
     
    Interface to PC
    • Accept USB 1.1 or USB 2.0
     
    PC system requirements
    • Operating system: Windows 98SE/Me/2000 or Windows XP
    • Processor: Pentium and above
    • Memory: 256M and above
    • Hard Disk: over 100M free space
    • CD ROM driver
    • Interface: USB 1.1 or 2.0 interface
     
    General
    • Power adapter: 65W AC 100-240/47-63HZ Auto Switch.
    • Out put: DC (12V/3A, 5V/6A)
    • Operation temp: 5 to 45 degree C
    • Safety: CE&LVD certified
    • Shipment Weight: 5.0 Kg without modules.
  • 文档下载
    2011/9/9  LABTOOL-T400适配器列表
    2011/9/9  LabTool-T400中文使用说明书
    2011/9/9  LT-T400_新升级Enable Last State文档
    2011/9/9  LT-T400_新升级Mark Bad Block文档
    2011/9/9  LT-T400_新升级Qualcomm 文档
    2011/9/9  LabTool-T400支持器件列表v4.0
    2011/9/9  LabTool-T400英文说明书
    2011/10/26  T400适配器_2011Q4_新 .pdf
    软件下载
    2011/9/9  LT-T400_V4.00版本软件.EXE
    2011/9/9  LT-T400_V4.00 for WIN7软件版本
    2011/10/26  LABTOOL-T400_410版本软件
    方案下载
    收藏该页】【关闭窗口
     
    Copyright © 2007-2018 双龙电子版权所有 备案号:<粤ICP备10080904号-2>