热门图片
    Saleae Logic Pro8 ...
[详细内容]
热门产品
SL-USBISP-A II代
SL-USBISP-A
SL-AVRISP
SLISP
双龙单片机仿真
SL-JTAGICEmkII
SL-JTAGICE USB
ATMEGA406 智能电池应...
  当前位置:首页 >> 台湾研仪编程器 >> 
LABTOOL-48UXP
发布时间:2011/9/16 阅读:24154次
产品简介: LABTOOL-48UXP是ADVNTECH(台湾研仪)公司研制的高效智型编程器,高速高效高可靠,千方百计为用户节省设备投资,给
型号: LABTOOL-48UXP 智能通用编程烧录器
产品描述:

LABTOOL-48UXP全球最聪明的烧写编程器

十多年的结晶,造就如此完美的编程器

LABTOOL-48UXP是ADVNTECH(台湾研仪)公司研制的高效智型编程器,高速高效高可靠,千方百计为用户节省设备投资,给您带来更高经济效益。是目前编程种类最多、速度最快、可靠性最好的多功能烧写工具,已经成为国内最影响力的编程器,深受国内科研人员、开发工程师、生产厂家的喜爱。

参考图片:

LABTOOL - 48UXP智能通用编程器

LABTOOL-48UXP 智能万用编程器功能特点:

  • USB及带自动切换电源的打印机接口
  • 支持 5V 和 3.3V 低电压芯片, 通过低电压适配器支持 1.8V 芯片
  • 少于 2 秒/兆位编程速度对于高密度 flash 存储器芯片
  • DIL 芯片最大 48 脚无需适配器
  • 44-pin PLCC/ QFP/ TQFP/PSOP and 40/48 TSOP 通用适配器
  • 支持 Windows 95/98, Windows 2000, windows XP 和 NT
  • 48 脚通用引脚驱动器电流限制自动感应/ 用统计报告自编程/连续性检查
  • 自动 EPROM/ Flash ID 查找  .存储器/ P 芯片连载
  • 存储器缓冲高/ 低字节交换.项目文件保存 / 载入功能
  • 用户可选校验一次或两次 Vcc 电压
  • 自动文件格式检查和转换
  • 用户可改变编程参数.提供所有适配器的引脚转换表
  • 1 年保修,通过互联网升级软件
  • LabTool-48UXP 的通用引脚驱动器,每个引脚可以提供四种不同的电压,地,它可以设置为带拉高/拉低的 TTL 高/低电平,高速时钟和高阻这样先进的引脚设计使你无需适配器即可对任何DIL芯片编程,最大48 pin

无以伦比的编程速度

  • LabTool-48UXP 的智能特性把系统的开销减少到最低,LabTool-48UXP 在编程高密度 flash 存储器芯片上比它的前辈LABTOOL-48快1倍,它可以在60秒内编程一片Intel 32 M bit flash 芯片LabTool-48UXP 比它的竞争对手快很多, 使它能更快地编程现在高密度数兆位的存储器芯片 
     

 操作
Intel 28F320C3B
AMD 29DL323DB
Blank check
18.6 sec
18.9 sec
Program
57.5 sec
76.2 sec
Verify
32.5 sec
33.0 sec
合计
 108.6 sec
128.1 sec

 

 

 


以检查不良的引脚接触芯片插反或放错位置

  • 在Labtool-48UXP 执行IC插入和接触检查,如无错误,才执行其它操作。如有错误,它会提示哪根针脚接触不良或插入正反颠倒。这一功能防止因操作者的错误造成的昂贵的芯片损失,减少你的损失。

EPROM 和 Flash 存储器 ID 检测和查找

  • EPROM 和 Flash 存储器有嵌入的芯片ID和生产厂家ID ,LabTool-48UXP可以通过按热键读取芯片的ID,检测ID并同它的数据库比较来决定芯片的正确生产厂家和产品编号,对于二手芯片和意外(或有意)地被擦除厂家和产品编号的芯片这个特点特别有用(这一功能仅适用于28pin 或32pin EPROM 和Flash)

自动感应和自编程

  • 为了满足大规模生产的要求 LabTool-48UXP 在硬件和软件中采用了新的专利技术进入量产模式后, 生产线上的操作人员把一片芯片插入ZIF 插座,LabTool-48UXP 上的一个 LED 提示芯片已编程完毕操作人员只需拿走芯片换上一片新的,无需正式的培训人员操作,增加了灵活性并节省时间和费用,并且LabTool-48UXP 的自动感应特性保证芯片被正确地插入后才自动编程芯片而且,在量产模式中系统键盘被自动禁止以防止操作人员不注意地操作错误

项目文件保存和载入

  • 用户可以创建和保存一个包含芯片选项缓冲数据和所有编程设置选项的项目文件, 项目文件可以任何时候调用而不用再作设置, 你的设计文件可以方便地交给生产部门

序列号功能

  • 如果你的存储器芯片需要带有不同增量顺序和初始值的单独的序列号,LabTool-48UXP 有自动增量的功能每次插入一片新的芯片就使缓冲中的序列号增加这就节省了时间和金钱

用户可选校验电压, 一次或两次校验

  • 编程芯片后 LabTool-48UXP 让你选择校验电压, 例如, Vcc, Vcc 5%, Vcc10%. Vcc 电压可以是 2.0V 到 6.5V 这个特性确保你的芯片已被正确编程,防止因编程错误导致编程失败并保存数据

通过不同的转换器支持非 DIL 芯片

  • LabTool-48UXP 的通用引脚驱动器使它无需 DIL-to-DIL 适配器就能编程所有48-pin DIL 芯片, 包括所有的单片机然而除了 DIL 封装有许多不同的封装例如 PLCC, SOP, TSOP, QFP 和 SDIP 我们开发了 100 多种不同的适配器以支持这些特殊封装的芯片.

3 年保修通过互联网升级软件

  • LabTool-48UXP 的附加安全特性如嵌入的电流限制和引脚连续性检查功能这就防止了编程期间坏的芯片造成的损坏因此我们提供LabTool-48UXP的3年主机保修可以通过互联网在 www.aec.com.tw 免费升级软件

通用 44-pin PLCC, QFP, PSOP 和 TQFP 适配器支持 44-pin 的芯片

  • LabTool-48UXP 的通用引脚驱动器使你能支持所有 44-pin 的芯片如EPLD,EPROM, Flash, EPLD 和单片机只需一个 44-pin 的通用适配器这就不需要购买多个适配器也就节省了金钱而且, 48 pin 以内的不同封装的芯片只需一个适配器

引脚转换表-自制适配器

  • LabTool-48UXP 提供所有适配器的引脚转换表可以从www.aec.com.tw/products/adapters.pdf 下载如必要你可以下载相应的转换表自制适配器, 节省时间和金钱

低电压芯片支持

  • LabTool-48UXP 支持 2.0V - 5.0V 逻辑电平输入/输出, 并能提供 2.0V - 21V 模拟电压 (如 VCC) 支持低于 2.7V 的低电压芯片如通过低电压适配器支持1.8V芯片规格

插座和引脚驱动器

  • 48-pin DIL/ ZIF 插座 8pin - 48pin 300/ 600-mil 芯片

四个八位精度 DACs for Vcc, Vpp1, Vpp2 and Vpp3 软件可调上升时间和电流限制保护


逻辑驱动器支持所有48 pin 2.0V-5V 上拉/ 下拉或高阻的器件


芯片支持目前30000多种IC:

  • 存储器 : PROM, EPROM, EEPROM, Flash, Serial PROM, NVRAM  逻辑芯片: PAL, GAL, CEPAL, PEEL, CDLD, EPLD,其他: OTP/Flash 、单片机

芯片操作:

  • 读, 查空, 芯片插入/接触检查, 校验, 校验和, EPROM ID 检查, 比较, 擦除,功能测试, 编程, 存储器保护, 芯片设置设定, 编辑缓冲, 量产模式, 修改向量, 连载, 高/低字节缓冲交换, 缓冲查找

PLD 向量测试器:

  • 支持 JEDEC 测试向量最大48 pin,2500V/usec. 上升时间

文件格式转换:

  • JEDEC, POF, Binary, Intel HEX, Intel EXT HEX, Motorola S, HP 64000ABS,Straight Hex TEKTRONIC Hex, 自动检查和转换

PC 系统要求:

  • 操作系统: Windows 95/98, Win 2000, Windows XP 或 Windows NT,处理器: 386 以上,最少 8 MB RAM , 建议 32 MB RAM,硬盘剩余空间 16 MB,EPP 模式的并口,CD ROM 驱动器,电源: 100 - 240 VAC, 自动切换

频率范围 :

  • 47 - 63 Hz ; 功耗 : 25 W  ; 工作温度: 5 - 45 (41 - 113℉) ; CE & LVD 认证  ; 重 1.8K
USB及带自动切换电源的打印机接口 .
支持 5V 和 3.3V 低电压芯片,
通过低电压适配器支持 1.8V 芯片
少于 2 秒/兆位编程速度对于高密度 flash 存储器芯片 
芯片最大 48 脚无需适配器.
44-pin PLCC/ QFP/ TQFP/PSOP and 40/48 TSOP 通用适配器 .
支持 Windows 95/98, Windows 2000, windows XP 和 NT.
48 脚通用引脚驱动器电流限制自动感应/ 用统计报告自编程/连续性检查自动
EPROM/ Flash ID 查找 
用户可选校验一次或两次 Vcc 电压 .
自动文件格式检查和转换.
用户可改变编程参数.提供所有适配器的引脚转换表 .
1 年保修,通过互联网升级软件
LabTool-48UXP 的通用引脚驱动器,每个引脚可以提供四种不同的电压,地,它可以设置为带拉高/拉低的 TTL 高/低电平,高速时钟和高阻这样先进的引脚设计使你无需适配器即可对任何DIL芯片编程,最大48 pin .无以伦比的编程速度
 
LabTool-48UXP Intelligent Universal Programmer
LABTOOL-48UXP Intelligent Universal Programmer
Features
  • USB or parallel port interface with auto-switch power
  • Support 5V and 3.3V low voltage devices, 1.8V chip support through low voltage adapter.
  • Less then 2 seconds per Mbit Programming speed for high density flash chip.
  • No adapter required for DIL chip up to 48-pin
  • 48-pin universal pin driver and current limit
  • Auto-sense/ Self programming with statistical report
  • Device insertion /continuity check
  • Universal adapter for 44-pin PLCC/ QFP/ TQFP/PSOP and 40/48 TSOP
  • Supports OS : Windows 95/98/Me/2000, windows XP and NT (Parallel port)
    Windows 98SE/Me/2000, windows XP (USB port)
  • Automatic EPROM/ Flash ID search
  • Serialization for Memory/μP chip
  • Memory buffer H / L byte swap
  • Project file save / load function
  • User-selectable verify Vcc with one or two-pass verify voltage
  • Automatic file format detection and conversion
  • User-changeable programming parameters
  • 1 years warranty
  • Software update via web
 
Universal pin driver--No adapter required for DIL devices
  • The LabTool-48UXP features universal pin driver, each pin can supply four different voltage, ground, it also can be configurable as TTL high/low levels with pull-high/pull-low, high-speed clock and high impedance. This advanced pin design lets you program any DIL device of up to 48 pins without needing an adapter.
 
Unbeatable programming speed
  • The LabTool-48UXP's on-board intelligence reduces system overhead to a minimum. The LabTool-48UXP has 100% more performance then its predecessor product in program the high density flash chip, it can program a Intel 32 M bit flash chip in less then 60 seconds.
 
Programming Speed Test Report
   
Intel 28F320C3B
AMD 29DL323DB
    Blank check
18.6 sec
18.9 sec
    Program
57.5 sec
76.2 sec
    Verify
32.5 sec
33.0 sec
    Total
108.6 sec
128.1 sec
 
  • The LabTool-48UXP is much faster than its competitors, making it much more productive with today's high density, multi-megabit memory devices.
 
Technological innovation and performance leadership
 
Device insertion and contact checks--No mistakes!
  • The LabTool-48UXP performs device insertion and contact checks before it programs each device. It can detect poor pin contact and devices inserted upside down or in the wrong position. This function protects your pocketbook by preventing expensive chip damage due to operator error.
 
EPROM and Flash memory ID detection and Search
  • Many EPROM and Flash memories have a build-in device ID and manufacturer ID. The LabTool-48UXP can read the device's ID by press hot key to detect the ID and compare its database and determined the chip's correct vendor and product number. This feature is especially useful with secondhand chips and devices that have had their part number accidentally (or intentionally) removed (this function only applied to 28 pin or 32 pin EPROM and Flash).
 
Auto-sensing and self-programming
  • To meet mass-production requirements the LabTool-48UXP has implemented new patented technology in both its hardware and software. After entering the Mass-production Mode, the production line operator inserts a device into the ZIF socket. An LED on the LabTool-48UXP indicates the device is ready and the operator simply removes it and replaces it with a new one. No formal training is necessary adding flexibility and saving time and money. In addition, the LabTool-48UXP's auto-sensing feature ensures the device has been inserted correctly and then automatically programs the device. Furthermore, in the mass-production mode the system keyboard is automatically disabled preventing the operator from making any inadvertent mistakes.
 
Project file save and load
  • User can create and save a project file which contains device selection, buffer data and all the programming set-up options, this project file can be called upon at any time for future use without having to go through the setting up procedure again, your design file can easily pass to production department without making any mistake.
 
Serialization function
  • If your memory devices need individual serial numbers with different increment sequence and initial value, the LabTool-48UXP has an Auto Increment function. This simply increments the serial numbers in the buffer each time a new device is inserted. This saves time and money.
文档下载
2011/9/8  labtool-848xp/48uxp适配器列表
2011/9/9  LT-48UXP批量烧录小技巧
2011/9/9  LT-48UXP自检小技巧
2011/9/9  LT-48UXP文件分段烧录小技巧
2011/9/9  LabTool-48UXP_830器件列表
2011/9/9  LabTool-48UXP中文使用说明书
2011/9/9  LabTool-48UXP英文使用说明书
2011/9/9  LabTool-48UXP_8.6支持器件列表
软件下载
2011/9/1  LT48UXP_V8.32.03 XP软件
2011/9/9  LT48UXP_V8.6版本软件
2011/10/26  LT48UXP_870_WIN7.EXE
方案下载
收藏该页】【关闭窗口
 
Copyright © 2007-2018 双龙电子版权所有 备案号:<粤ICP备10080904号-2>